Product ID:LYSERGOL 86208-8
MSDS Date:10/07/1988
FSC:6810
NIIN:00N014701
MSDS Number: BKPBB

Info Phone: 414-273-3850

Cage: 60928

Telephone: 414-273-3850

Cage: 60928

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

LD50 LC50 Mixture:LD50:(IV,RAT) 320 UG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY BE FATAL IF INHALED,
SWALLOWED, OR ABSORBED THRU SKIN. MAY CAUSE IRRITATION.
Explanation of Carcinogenicity:NONE.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IN CASE OF CONTACT, IMMEDIATELY FLUSH EYES OR SKIN WITH
COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES WHILE REMOVING
CONTAMINATED CLOTHING AND SHOES. IF INHALED, REMOVE TO FRESH AIR.
IF NOT BREATHI NG GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS
DIFFICULT, GIVE OXYGEN. CALL MD. WASH CONTAMINATED CLOTHING BEFORE
REUSE. INGEST: CALL MD IMMEDIATELY .

Extinguishing Media:WATER SPRAY. CO2, DRY CHEMICAL POWDER, ALCOHOL OR
POLYMER FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . PREVENT CONTACT WITH SKIN AND EYES.
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

Spill Release Procedures:WEAR NIOSH/MSHA APPROVED SCBA, RUBBER BOOTS
AND HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN A BAG AND HOLD FOR
WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE AREA AND WASH SPILL
SITE AFTER MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT BREATHE DUST. KEEP TIGHTLY
CLOSED. STORE IN A COOL DRY PLACE.
Other Precautions:AVOID CONTACT WITH EYES, SKIN AND CLOTHING. AVOID
PROLONGED OR REPEATED EXPOSURE. HIGHLY TOXIC.

Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:USE ONLY IN A CHEMICAL FUME HOOD.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING, SAFETY SHOWER AND EYE
BATH.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:T1
Melt/Freeze Pt:M.P/F.P Text:478F,248C
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

STRONG OXIDIZING AGENTS & STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF: CO, CO2 & NOX.

Waste Disposal Methods:DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE
SOLVENT AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN
AFTERBURNER AND SCRUBBER. OBSERVE ALL FEDERAL, STATE & LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.